SmartKDP

KDP Cover Size & Spine Calculator

Exact full-wrap cover dimensions and spine width for paperback and hardcover — with and without bleed, DPI-correct pixel sizes, and a downloadable SVG cover guide.

KDP supports 24–828 pages for this ink type.

Your cover dimensions

Spine width
0.450"
Front cover
6.000" × 9.000"
Full cover (no bleed)
12.450" × 9.000"
Full cover (with bleed)
12.700" × 9.250"
MeasurementInchesCentimetersPixels @300dpiPoints
Full cover width (with bleed)12.70032.263810914.4
Full cover height (with bleed)9.25023.502775666.0
Spine width0.4501.1413532.4

Cover bleed is a flat 0.125in on every non-spine edge, per KDP's published spec. Spine text needs roughly 100+ pages to fit legibly.

Cover guide

Back coverFront coverSpine — 0.450"Paperback · 6" × 9" · 200 pages

How the formula works

Spine width is your page count times a per-page thickness constant, plus a fixed board offset for hardcover:

spine width = page count × per-page thickness [+ board offset]

Full-wrap cover width is two front covers plus the spine — with KDP's standard 0.125in bleed added on every edge except the spine folds:

cover width = (2 × trim width) + spine width [+ 2 × bleed]

Paperback constants come directly from KDP's public spine-width guidance. Hardcover constants were reverse-engineered from a large reference dataset — see the FAQ below for the accuracy caveat.

How is spine width calculated?

Spine width is your page count times a per-page paper-thickness constant that depends on your paper color and interior ink type (white, cream, standard color, or premium color). Hardcover adds a fixed board-thickness offset on top of that.

Why does the calculator show two full-cover sizes?

One is the trim-based size (no bleed) and one adds KDP's standard 0.125in bleed on every outer edge except the spine folds. Submit the with-bleed size as your actual cover file — KDP trims the bleed off after printing.

How accurate are the hardcover numbers?

The paperback formula uses KDP's own published per-page thickness constants. The hardcover formula was reverse-engineered by fitting a large reference dataset of real KDP hardcover dimensions — it matched to within 0.001in across every trim size and paper type we tested, but treat it as a best-effort estimate and verify against KDP's official template download before final print submission.

How many pages do I need for spine text?

KDP generally recommends at least 100 pages before spine text is legible at standard print quality — thinner spines get cropped or distorted text.

What's the safe area on the cover guide?

The dashed inner line is KDP's published text-safety margin (0.125in inset from the trim edge on the front and back cover) — keep any text or important imagery inside it so it isn't cut during trimming.

Where does the barcode go?

The placeholder box on the back cover is KDP's standard barcode area (2in × 1.2in, bottom-right, inset from the safe area) — KDP can generate your barcode automatically at upload, or you can place your own ISBN barcode there.