Skip to main content

6.14" × 9.21" cover size for a 150-page book

Spine width, full-wrap dimensions, and print-ready pixel sizes for a 150-page 6.14" × 9.21" KDP paperback on white paper with a black-ink interior.

Spine width
0.338"
Full cover (no bleed)
12.618" × 9.210"
Full cover (with bleed)
12.868" × 9.460"
At 300 DPI
3,860 px × 2,838 px

Change the paper, ink, or page count

The calculator below starts on this book's settings. Switching to cream paper or a colour interior changes the spine width, because the paper is a different thickness.

KDP supports 24–828 pages for this ink type.

Your cover dimensions

Spine width
0.338"
Front cover
6.140" × 9.210"
Full cover (no bleed)
12.618" × 9.210"
Full cover (with bleed)
12.868" × 9.460"
MeasurementInchesCentimetersPixels @300dpiPoints
Full cover width (with bleed)12.86832.683860926.5
Full cover height (with bleed)9.46024.032838681.1
Spine width0.3380.8610124.3

Cover bleed is a flat 0.125in on every non-spine edge, per KDP's published spec (verified 22 July 2026). KDP prints spine text only on books with more than 79 pages (verified 31 July 2026); allow around 150 for type that stays comfortably legible after its required 0.0625in of clearance on each side.

Cover guide

Back coverFront coverSpine — 0.338"Paperback · 6.14" × 9.21" · 150 pages

How this spine width is worked out

A paperback spine is the stacked thickness of its pages, so the width is the page count multiplied by a per-page paper thickness. At 150 pages on white stock that comes to 0.338".

The full-wrap cover is two 6.140" covers plus that spine, which is why the no-bleed width is 12.618". KDP's standard 0.125" bleed then adds a quarter inch to both dimensions, giving the file size you actually upload.

What this book costs to print

On Amazon.com, a 150-page 6.14" × 9.21" paperback with a black-ink interior costs $5.39 per copy to print — this trim is in KDP's large-trim band, which prints on the more expensive of the two cost tables. That sets a price floor of $9.99: below it, a sale would earn a negative royalty and KDP will not accept the price.

At 150 pages the per-page charge applies: KDP's black-ink paperback rate above 24 pages is $2.84 plus $0.017 a page, which is how this book reaches $5.39 per copy. Each further 50 pages adds about $0.85. KDP does not publish a separate short-book rate for large trims, so this table applies its per-page charge across the whole range — treat the figure as a conservative estimate rather than a quote.

Designing a cover for a 150-page 6.14" × 9.21"

The spine is 0.338" at 150 pages, but the type does not get all of it: KDP wants 0.063" clear on each side, so the usable height is 0.213". 15pt is a legible spine and not a generous one: a short title, no author line, no rule.

6.14" × 9.21" is a 1:1.50 page — the classic book proportion, which is what most cover templates assume. The full wrap at 150 pages is 12.868" × 9.460" with bleed, of which the spine takes 2.6% of the width. KDP's barcode block is a fixed 2in × 1.2in whatever the trim, so on this size it claims 4% of the back cover — keep anything that needs reading out of it. KDP also offers 6.14" × 9.21" in hardcover, where board thickness is added on top of the paper and the spine calculation changes.

The same 150-page book at 6" × 9" costs $2.80 per copy against this book's $5.39 — $2.59 apart on every copy sold. That is KDP's 6.12-inch band boundary, not the size difference: 6.14" × 9.21" is on the large-trim table, 6" × 9" is not.

What 6.14" × 9.21" is for: A slightly larger book than 6 × 9, at large-trim printing rates — academic and reference titles, and books whose interior design needs marginally more width than 6 × 9.

SmartKDP is not affiliated with, endorsed by, or sponsored by Amazon. Amazon, Kindle, and Kindle Direct Publishing are trademarks of Amazon.com, Inc. or its affiliates.