5.25" × 8" cover size for a 200-page book
Spine width, full-wrap dimensions, and print-ready pixel sizes for a 200-page 5.25" × 8" KDP paperback on white paper with a black-ink interior.
- Spine width
- 0.450"
- Full cover (no bleed)
- 10.950" × 8.000"
- Full cover (with bleed)
- 11.200" × 8.250"
- At 300 DPI
- 3,360 px × 2,475 px
Change the paper, ink, or page count
The calculator below starts on this book's settings. Switching to cream paper or a colour interior changes the spine width, because the paper is a different thickness.
Your cover dimensions
| Measurement | Inches | Centimeters | Pixels @300dpi | Points |
|---|---|---|---|---|
| Full cover width (with bleed) | 11.200 | 28.45 | 3360 | 806.4 |
| Full cover height (with bleed) | 8.250 | 20.96 | 2475 | 594.0 |
| Spine width | 0.450 | 1.14 | 135 | 32.4 |
Cover bleed is a flat 0.125in on every non-spine edge, per KDP's published spec (verified 22 July 2026). KDP prints spine text only on books with more than 79 pages (verified 31 July 2026); allow around 150 for type that stays comfortably legible after its required 0.0625in of clearance on each side.
Cover guide
How this spine width is worked out
A paperback spine is the stacked thickness of its pages, so the width is the page count multiplied by a per-page paper thickness. At 200 pages on white stock that comes to 0.450".
The full-wrap cover is two 5.250" covers plus that spine, which is why the no-bleed width is 10.950". KDP's standard 0.125" bleed then adds a quarter inch to both dimensions, giving the file size you actually upload.
What this book costs to print
On Amazon.com, a 200-page 5.25" × 8" paperback with a black-ink interior costs $3.40 per copy to print — this trim is in KDP's standard band. That sets a price floor of $6.80: below it, a sale would earn a negative royalty and KDP will not accept the price.
At 200 pages the per-page charge applies: KDP's black-ink paperback rate above 110 pages is $1.00 plus $0.012 a page, which is how this book reaches $3.40 per copy. Each further 50 pages adds about $0.60.
Designing a cover for a 200-page 5.25" × 8"
The spine is 0.450" at 200 pages, but the type does not get all of it: KDP wants 0.063" clear on each side, so the usable height is 0.325". 23pt takes a full title, or a short title with the author's surname under it.
5.25" × 8" is a 1:1.52 page — the classic book proportion, which is what most cover templates assume. The full wrap at 200 pages is 11.200" × 8.250" with bleed, of which the spine takes 4.0% of the width. KDP's barcode block is a fixed 2in × 1.2in whatever the trim, so on this size it claims 6% of the back cover — keep anything that needs reading out of it. KDP offers 5.25" × 8" in paperback only.
Worth knowing before you commit to the size: the same 200-page book at 6" × 9" costs exactly the same $3.40 to print. KDP prices paperbacks by trim CATEGORY and page count, not by area, and both of these are in its standard-size band — so at this length 5.25" × 8" against 6" × 9" is a design decision, not a margin one.
What 5.25" × 8" is for: A slightly roomier alternative to 5 × 8 — fiction that needs marginally wider lines than 5 × 8 allows, and memoirs and essay collections.
SmartKDP is not affiliated with, endorsed by, or sponsored by Amazon. Amazon, Kindle, and Kindle Direct Publishing are trademarks of Amazon.com, Inc. or its affiliates.
Get the KDP toolkit updates
New free tools and KDP rate-change alerts, occasionally, no spam.