Skip to main content

5.06" × 7.81" cover size for a 800-page book

Spine width, full-wrap dimensions, and print-ready pixel sizes for a 800-page 5.06" × 7.81" KDP paperback on white paper with a black-ink interior.

Spine width
1.802"
Full cover (no bleed)
11.922" × 7.810"
Full cover (with bleed)
12.172" × 8.060"
At 300 DPI
3,652 px × 2,418 px

Change the paper, ink, or page count

The calculator below starts on this book's settings. Switching to cream paper or a colour interior changes the spine width, because the paper is a different thickness.

KDP supports 24–828 pages for this ink type.

Your cover dimensions

Spine width
1.802"
Front cover
5.060" × 7.810"
Full cover (no bleed)
11.922" × 7.810"
Full cover (with bleed)
12.172" × 8.060"
MeasurementInchesCentimetersPixels @300dpiPoints
Full cover width (with bleed)12.17230.923652876.4
Full cover height (with bleed)8.06020.472418580.3
Spine width1.8024.58541129.7

Cover bleed is a flat 0.125in on every non-spine edge, per KDP's published spec (verified 22 July 2026). KDP prints spine text only on books with more than 79 pages (verified 31 July 2026); allow around 150 for type that stays comfortably legible after its required 0.0625in of clearance on each side.

Cover guide

Back coverFront coverSpine — 1.802"Paperback · 5.06" × 7.81" · 800 pages

How this spine width is worked out

A paperback spine is the stacked thickness of its pages, so the width is the page count multiplied by a per-page paper thickness. At 800 pages on white stock that comes to 1.802".

The full-wrap cover is two 5.060" covers plus that spine, which is why the no-bleed width is 11.922". KDP's standard 0.125" bleed then adds a quarter inch to both dimensions, giving the file size you actually upload.

What this book costs to print

On Amazon.com, a 800-page 5.06" × 7.81" paperback with a black-ink interior costs $10.60 per copy to print — this trim is in KDP's standard band. That sets a price floor of $17.67: below it, a sale would earn a negative royalty and KDP will not accept the price.

At 800 pages the per-page charge applies: KDP's black-ink paperback rate above 110 pages is $1.00 plus $0.012 a page, which is how this book reaches $10.60 per copy. Each further 50 pages adds about $0.60.

Designing a cover for a 800-page 5.06" × 7.81"

The spine is 1.802" at 800 pages, but the type does not get all of it: KDP wants 0.063" clear on each side, so the usable height is 1.677". 120pt is a designable spine in its own right: title, author, imprint, and enough height that a rule or a repeated motif reads rather than crowds. Switch to cream and the same 800 pages measure 2.000" — 0.198" wider, which is more than the clearance itself, so a cover built on the white figure will not fit.

5.06" × 7.81" is a 1:1.54 page — the classic book proportion, which is what most cover templates assume. The full wrap at 800 pages is 12.172" × 8.060" with bleed, of which the spine takes 14.8% of the width. KDP's barcode block is a fixed 2in × 1.2in whatever the trim, so on this size it claims 6% of the back cover — keep anything that needs reading out of it. KDP offers 5.06" × 7.81" in paperback only.

Worth knowing before you commit to the size: the same 800-page book at 6" × 9" costs exactly the same $10.60 to print. KDP prices paperbacks by trim CATEGORY and page count, not by area, and both of these are in its standard-size band — so at this length 5.06" × 7.81" against 6" × 9" is a design decision, not a margin one.

What 5.06" × 7.81" is for: Matching the classic mass-market paperback footprint — genre fiction aiming to sit alongside traditionally published paperbacks, and series where shelf consistency with existing mass-market titles matters.

SmartKDP is not affiliated with, endorsed by, or sponsored by Amazon. Amazon, Kindle, and Kindle Direct Publishing are trademarks of Amazon.com, Inc. or its affiliates.